Rally RC Model MJX Hyper Go 10303

This is very beautiful 1:10 replica model with licensed body. It is equipped with a brushless motor. The settings of its ESC can be adjusted via a phone over Bluetooth. There is also a gyroscope to assist with control. The degree of its action can be adjusted.

1. The model comes well packaged in a large colorful box.


2.


3.


4. Installed wheel arch liners – with them, much less dust and dirt gets inside. Also the side sills – they hold the edges of the Lexan body to prevent them from vibrating while driving.


5. Inside Lexan dust cover completely encloses the main part of the model. But in hot weather, everything underneath gets very hot. So I bought a mesh cover that installed instead of plastic dust cover.


6. Also added extra lights on the hood and fog lights in the bumper.


7. Attached license plate at the rear bumper – just for fun )


8. Added air intake mesh grilles for a more scale look. And put on other wheels.


9. Installed underbody lighting.


10. You can never have too much light.


A few night shots with all the lighting on:
11.


12.


13.


14.


15.


On a 2S battery, this model reaches about 70 km/h. A short video, shot from inside and outside.


16. After a few runs, an issue appeared: model stuck. I had to completely disassemble the chassis.


17. It turned out that the screw securing the bevel gear of the rear differential had come loose. It shifted, causing the spur gear to disengage. I tightened the screw and applied threadlocker. Now everything is fine.


18. All in all, this is a really cool model. It drifts wonderfully. And driving a rally model is a new experience for me. The speed here is completely different from the trophy truck class ) MJX 10303 has earned a place of honor in my collection.


Back